Quantcast

How to Adjust the Lyric Voice Command Sensitivity?

honeywell lyric voice commands image

Here you will learn how to adjust the voice command sensitivity of the Honeywell Lyric controller. If you find  yourself constantly having to repeat voice commands or speak abnormally loud to get the Lyric controller to respond it may be time to adjust the sensitivity of those commands in the Lyric Counter Menu.

To access the Lyric Counter Menu make sure the system is disarmed and from the home screen select security > tools > enter the master code which by default is "1234" > select voice command > than you will see the counter menu on the top left. 

To improve the Lyric's responsiveness you will need to change the accuracy value.

To do this follow the instructions below -

1) Select a specific command phrase you are having difficultly with in the assigned column on the counter screen.

2) Find the phrase's lowest last 10 accuracy number.

3) In the accuracy column, press the displayed number. A keypad will than appear.

4) Enter a number slightly higher than the number cited in setp #2. For example, if the lowest last 10 accuracy number is 499 select 700.

5) Select Done.

Now you can try out your new sensitivity level of that specific voice command. If you are not satisfied with the results you may need to repeat this process a few times to hit your desired level. Also experiment with the command and trigger sensitivity slider for the best performance. 

If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact AlarmClub at 1-844-335-5897 for your free consultation! *We are usually able to takeover just about any kind of security system so don’t hesitate.
 
Alarm Monitoring Services

Honeywell Lyric Controller FAQ’s
 
Honeywell Lyric Controller Manuals



All Honeywell Lyric Security System Video's Playlist : 


 

 

Did you find this article helpful?