Can the Honeywell SiXGB be Automatically Enrolled?
Yes, the Honeywell SiXGB can be automatically enrolled into the Lyric Controller using the batch programming or tampering method. When the Lyric panel is ready to receive the SiXGB information by pressing start in programming mode, pulling the battery tab will cause the transmitter to register with the Lyric panel on the panel-specified channel and is assigned a network ID by the panel.
Also, when you enter an open zone in Lyric programming, select serial number and you can than press and release the tamper button located in the back of the SiXGB sensor this will also cause the sensor to register with the Lyric controller on the panel-specified channel and is assigned a network ID by the panel.
If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact AlarmClub at 1-844-335-5897 for your free consultation! *We are usually able to takeover just about any kind of security system so don’t hesitate.
Alarm Monitoring Services
Honeywell SiXGB Product Manuals
Honeywell SiXGB FAQ's
Did you find this article helpful?