Quantcast

Honeywell Lyric Security System FAQ's

Can the Lyric Controller Communicate through a Phone Line?

No, the Honeywell Lyric controller is not able to communicate its alarm signals through a phone line. Previous Honeywell all-in-one wireless security systems did allow for this communication path but, with the ...

Read Article

Will the Lyric Controller Power Up in a Previous State?

Yes, the Honeywell Lyric Controller will power back up in a previous state. If the panel is powered completely down AC and Backup Battery, it will return to its' previous state when power is restored. If the pa...

Read Article

What is the Lyric Controller Power up Procedure?

To power up a Honeywell Lyric controller it must have the battery plugged in first, then apply Transformer power. 2. CHECK THE DISTANCE OF THE TRANSFORMER WIRE! When wiring the Transformer, the wire should nev...

Read Article

What is a Lyric Controller Push User Code?

The Honeywell Lyric Controller can push user codes including a Duress codes out to compatible Z-wave door locks, in this way the codes in the door lock and the controller will always match. When a user code is ...

Read Article

How to Disable the Lyric Controller Quick Arm Feature?

To disable the Quick Arm Feature from the Honeywell Lyric Controller home screen select Security > Tools > enter installer code "default is 4112" > Program > System Settings > Toggle the Quick Ar...

Read Article

Does the Lyric Controller have a Real Time Clock?

Yes, the Honeywell Lyric controller has a real time clock. The Lyric controller has a real time clock which is always displayed on the home screen. Note: When you have an activated AlarmNet Communicator, the ...

Read Article

Does a Lyric Controller Work with Total Connect 2.0?

Yes, the Honeywell Lyric Controller is able to work with Total Connect 2.0 interactive alarm monitoring services. The Lyric controller from factory comes with a internal Wi-Fi alarm communicator that can be use...

Read Article

How can I Hear the Lyric Controller Voice Announcements Better?

The Honeywell Lyric controller does indeed announce system status from the controller itself. Some people have a larger home where from certain points in the home may not be able to hear the Lyric controller vo...

Read Article

How Do I Tell What Revision my Lyric Controller Has?

The Honeywell Lyric controller software revision of the controller can be found in several ways. 1. From the Lyric Controller home screen select Security > Tools > enter 4 digit installer code "default i...

Read Article

Does the Lyric Controller have RF Jam Detection?

Yes, the Honeywell Lyric Controller offers optional RF jam detection for wireless systems which detects a condition that may impede proper RF reception (i.e., jamming or other RF interference). RF jamming occur...

Read Article